The Additional Chief Secretary to Govt. Haryana, Town and Country Planning, Department, Haryana, Chandigarh.Industries & Commerce Department, Haryana through its . Memo. No. CLU-M-388/8/7/2023-2TCP Dated: 17.05.2023 made Amendment in Industrial Licensing Policy dated 01.10.2015: Policy regarding grant of licences for development of Industrial colony in Industrial/Agriculture zone in view of Enterprises Promotion Policy- 2015
Reference:- Partial amendment to the policy instruction issued vide Memo. No. Misc. 388/PA(RB)/2015/7/ 16/2006- 2TCP dated 01.10.2015 and Memo. No. Misc.388/7/16/2019-2TCP Dated 09.03.2019.
TheGovernor of Haryana is hereby pleased to make the following amendments in the Industrial Licencing Policy 2015, as referred above, which are as under:-TheGovernor of Haryana is hereby pleased to make the following amendments in the Industrial Licencing Policy 2015, as referred above, which are as under:-
This is issued as per approval of Council of Ministers accorded in its meeting dated 09.05.2023 and as per approval received from Secretary, Council of Ministers vide U.O No. 9/76/2023-2Cabinet Dated 11.05.2023 . (Arun Gupta, IAS) Additional Chief Secretary to Govt. Haryana, Town and Country Planning, Department. foreword its copies to the Secretary, Council of Ministers, Haryana with respect to U.O No. 9/76/2023-2Cabinet Dated 11.05.2023, affirming the implementation of the decision taken in the meeting of the Council of Ministers held on 09.05.2023 w.r.t the subject cited policy.
All fresh Stilt+4 Building Plan approvals in residential plots have been kept in abeyance vide order dated – 23/02/2023. including the application pending / received for approval. Also the Government has Constituted an Expert Committee of the officers vide order dated 16/03/2023 to examine the issues pertaining to construction of Stilt+ 4 floors comprehensively and to recommend future of action in the matter .However the expert committee is yet to submit its recommendation report.
Now application have been received for approval / revision of zoning plans where the respective layout plans have been issued at the time of grant of License , before issuance of order dated 23/02/2023 , considering density of 18 persons per plot ( i.e 4 dwelling units) and do not fulfil minimum density of 240 PPA as per Deen Dayal Jan Awas Yojna Policy-2016. If the density of 13.5 persons per plot ( i.e 3 dwelling units ) is considered .
The matter has been deliberated and decided such cases where layout plan stands issued alongwith license with density of 18 person plot (i.e 4 dwelling units) and do not fulfil the minimum density norms of 240 PPA on the basis of 13.5 persons per plot (i.e 3 dwelling units) , may be considered for approval of zoning plan with 13.5 persons per plot in relaxation of the density norms in DDJAY Policy 2016 , considering fait-accompli. However it is proposed that while approving such zoning plans , the following may be incorporated as zoning clauses:-
a) No. of Dwelling units permitted on each plot : 3
b) Provided that in case the decision dated 23/02/2023 to keep abeyance the approvals stilt+4 dwelling units is revoked by the competent authority and building plans approvals for such stilt+4 units is allowed . the Number of dwelling unit permitted on each plot shall be restored to 4 dwelling units.
There orders may be complied with in letter and spirit.
order no :- ZP-1702/ATP(YC)2023 Dated :- 10/05/2023
Haryana Government has decided to keep all fresh Stilt + 4 building plan approvals of Residential Plots in abeyance, including the apptications pending/received for approval.
Accordingly, it is hereby ordered that no new Stitt + 4 floor building plan shall be sanctioned till further orders. However, it is clarified that all earlier sanctioned Stilt+ 4 building plans shall be valid. Further, G+2 Floor and Stilt+3 Floors building plans can be applied for approval as per the prevailing guidelines. These orders shall apply to all departments across
the state viz. TCP, HSIIDC, ULB and HSVP. A core comity is made to discuss on approval of Stilt+4 floors. It may be possible that Officials of Haryana Government at some particular area or at some particular road with Stilt+4 floors will be allowed. Approval of Stilt + 4 floors are now stopped till new order.
Definition: A wall which is constructed to support the above slab or other building elements in a structure is called a load-bearing wall.
Main Features: Followings are the main features of load-bearing walls:
It is a structural element.
It carries the weight of a house from the roof and upper floors.
Load bearing walls transfer loads all the way to the Foundation or other suitable frame members.
It can support structural members like beams (sturdy pieces of wood or metal), slab and walls on above floors above.
A wall directly above the beam is called a load bearing wall if it is designed to carry the vertical load.
Load bearing walls also carry their own weight.
This wall is typically over one another on each floor.
Load bearing walls can be used as an interior or exterior wall.
This kind of wall will often be perpendicular to floor joists or ridge.
Concrete is an ideal material to support these loads.
Types of Load Bearing Walls
Followings are the types of load bearing walls:
Precast Concrete Wall: This wall is aesthetically pleasing. The precast wall has superior strength and known for its durability. It provides excellent protection and is easy to install.
Retaining Wall: It provides lateral support. Installing a retaining wall has many environmental benefits like reducing erosion and protecting areas from being saturated. It is also known as revetment or breast wall.
Masonry Wall: Masonry is the most durable part of any structure. It allows for unlimited architectural expressions. They provide strength durability. Masonry wall also helps to control the temperature in indoor and out. Also, it increases the fire resistance. Lateral stiffness of the masonry wall is very low.
: It is used for building exterior wall cladding. The metal can be stainless steel, copper, aluminum. It supports gravity, seismic and wind loading. Pre Panelized Load Bearing Metal Stud Walls
Engineering Brick Wall: It uses double open-ended bond beam blocks. It is built using a mold. Block wall is replaced horizontally.
Stone Wall: It is treated as a stone structure. It is kinda masonry construction. This wall provides structure to a building and encloses an area.
Definition: A wall which doesn’t help the structure to stand up and holds up only itself is known as a non-load bearing wall. This wall is also referred to as Curtian wall”.Main Features: Followings are the main features of non-load bearing walls:
A non-load bearing wall doesn’t support floor roof loads above.
It is not a part of the structural frame system.
Most of the time, they are interior walls whose purpose is to divide the floor into rooms.
They are built lighter to reduce the dead load of the structure.
One can remove any non-load bearing walls without endangering the safety of the building.
Non-load bearing walls can be identified by the joists and rafters.
They are not responsible for gravitational support for the property. It is cost effective.
Types of Non-Load Bearing Walls
Followings are the type of non-load bearing walls based on the used wall unit:
Hollow Concrete Block Wall
Facade Bricks Wall
Hollow Bricks Wall
Brick Walls
Brief descriptions of these types of non-load bearing walls are given below:
Hollow Concrete Block
The walls of the concrete building are made hollow. It has the advantage of great strength. It gives stability without any waste of material.
Facade Bricks
It is solid, durable and practically maintenance free. Colors do not lose their radiance in this brick. Facade bricks are ecological and sustainable.
Hollow Bricks
They are green living. They can reduce the use of heating and cooling devices. They are strong and better used. Hollow bricks are cost effective.
Brick Walls
It is an immovable block or wall made of brick. Brick walls are easy to install.
We knew that in a framed structure A vertical structural member which can transmit the load from the slab, beam along with its self-weight to the foundation is called column.
Why we provide column?
Columns carry axial loads and therefore are designed for compression.
Other loads from snow, wind or other horizontal forces can cause bending in the columns.
We shall build up a small size structure by RR masonry at a certain height but the multi-story building cannot be constructed by RR masonry because the structure can able to transmit the heavy load to the foundation.
Basically, a column designed to distribute the compressive axial load & additional forces like snow, wind to the foundation eventually & it could be sustained the structure even in the earthquake or any other force majeure.
Column- Based on Shape & Reinforcement
Square/Rectangular Column
Composite/Encased Column
Circular Column
Y Type Column
T Type Column
L Type Column
Square/Rectangular Column
Most of the building structure was constructed by square or rectangular column. Significantly both are having same components and it is differ based on its architect view.
These type of column was economically good and easy to do shuttering, placing reinforcement & Concrete.
Composite/Encased Column
A vertical structural element, with a combination of steel section & concrete it is called as encased or composite column.
The composite column mostly provided for truss structure to avoid the steel corroded by any type of chemical.
Circular Column
The bending resistant is higher than square/rectangular column.
It occupies the lesser area.
Square/rectangular column reinforcement minimum 4 nos of steel will be places in the corner but in a circular column provide more than 4 nos.
Mostly in building circular column provided for the aesthetic purpose.
Economically it is little high to compare to square or rectangular column.
Y-type Column
These type of column mostly using for bridges construction.
The design of bridges to sustain the dead load of the structure & live load of the vehicle motion, the load was eventually distributed to the column.
T-type Column
These type of column having same features like square/Rectangular type column.
Mostly it was provided along with retaining wall or boundary wall based on design requirement.
L-type Column
The L type column has used in boundary wall construction and heavy type L column was used in the turning of metro rail or bridges construction.
Column- Based on Load
Axial Load Column
Uniaxial Load Column
Bi-Axial Load Column
Eccentric Load Column
Axial Load Column
The entire load passes through the centre axis of the column which coincides with the X-axis, it is called Axial Load.
The load shall be either compression or tensile load.
Uniaxial Load Column
The eccentric load act on either X axis or Y axis it is called Uni axial load column.
Bi-Axial Load Column
The eccentric load act on either X axis or Y axis it is called Uni axial load column.
Eccentric Load Column
The load shall pass parallel to the centre axis of the member but act on its cross-section that’s called Eccentric load.
Column- Based on Slenderness Ratio
The length of the column divided by its radius of gyration, it is called slenderness ratio of the column.
The slenderness ratio is used to find out the buckling stress of the column.
Long Column
Short Column
Long Column
Slenderness ratio of the column is greater than 12 it is called long column.
The column may fail on both compression & buckling load.
Short Column
Slenderness ratio of the column is less than 12 it is called short column.
High-pressure laminates have witnessed a huge upsurge in its variety and popularity all over India. Today, when it comes to opting for the HIGH PRESSURE LAMINATE you are spoilt for choice as there is a wide array of companies to choose from. Listed below are some of the leading brand exporters and manufacturers of HPL in India :
Fundermax
Whether it is a matter of furniture, facades or interior fittings, FunderMax is always to be found at the interface between ideas and materials. We understand architects, processors and the furniture industry – as well as the genuine decision-makers: your customers.
Fundermax is the leading manufacturer of High Pressure laminate, We think about the issues, we develop the products and we create them. Our strength lies in well thought out wood-based materials and compact laminates. We see ourselves as a production facility, a service partner and a design laboratory. Only because we are highly competent in all three fields can we make top-class performance a matter of course.
Alfa Ica India Ltd
Alfa Ica India Ltd is an ISO 9001:2000 Company and one of the leading Manufacturers & Exporters of High-Pressure Decorative Laminates. With headquarters in Ahmedabad, Alfa Ica produces approximately 6 million sq.mts of laminates in a variety of shapes, styles and colours which are exported in high volumes to Europe, USA, Australia, Hong kong, Singapore, Taiwan, etc. With an ISO-14001-2004 certification, the company is seriously committed to the adherence of environmental needs and confers to the norms laid down by the industry.
Alfa Ica boasts of technologically superior products that are at par with global standards with stringent quality checks done at every step to ensure the utmost quality. By constantly innovating and adding novel designs to their portfolio, they assure of the highest levels of customer satisfaction
Cedar Decor Private Limited
Since its inception in 2006, Cedar Décor Pvt Ltd has grown leaps and bounds and have come a long way to become one of the top HPL manufacturers in India. With quality being a top priority, they have acquired various quality certifications ranging from Indian Certifications like ISO 9001:2008 and ISO 14001:2004 to even certifications complying with British European standards. As a matter of fact, they were the first Indian Laminate company to get conferred the prestigious FSC certification. With over 1200+ designs to choose from and a wide distribution network both within India and overseas, Cedar is without doubt experts in the HPL field.
Century Ply Ltd
Century Ply has always been the pioneers in the field of HPL’s ever since they became the first country in India to be granted the ISO 9002 certification. Established in 1986, Century Ply has come a long way and is one of the key players in plywood and laminate industry in India. Their laminate division commenced operations in 2004 and today they are the largest seller of multi-use plywood and decorative veneers in the organized plywood market in India. After carving a niche in lifestyle products in India, they export their range of premium products to over 20 countries. Their commitment towards maintaining the highest levels of quality has earned them the prestigious ISO 9000: 2000 and ISO 14001: 1996 certifications
Eurotex Wood Pvt Ltd
Headquartered in Bielefeld, Germany, Eurotex specialises in high-class wooden flooring’s which include decking, cladding, HPL’s and wallpaper laminates designed to please the senses and last the tests of time. With over a decade of experience in wooden flooring backing them up, Eurotex is one of the leading importers and suppliers of high-quality laminate wood flooring and a renowned name in this business with clients all across India and the world. With a plethora of flooring designs to choose from, Eurotex leads the way in offering a wide range of stylish options based on International design standards
Green Future Solutions
Green future solutions are one of the major Indian companies for everything related to adhesive, bonding requirements and glazing related products. With clientele spread across various parts of India, they also have fostered strong collaborations and partnerships with major players like GE Sealants, Momentive Silicone Rubber, Lohmann Adhesive Tapes and Stanley Black & Decker for glass hardware related requirements. Additionally, they have a marked their presence in a number of companies ranging from food packaging to health products by delivering raw materials for a wide range of innovative products
Greenlam Industries Ltd
With a truly astounding presence in over 100 countries across the globe, Greelam Industries are not only the largest manufacturers of laminates in Asia but also the third largest laminate manufacturer in the world. With top-notch manufacturing facilities located at Behror, Rajasthan and Nalagarh, Himachal Pradesh, Greenlam has a stunning manufacturing capacity of over 12.2 million sheets per annum to cater to the needs of industries all around the world. Owning an 18 per cent stake in the domestic organized laminated market, Greenlam has been conferred quality standards which not only meets the domestic quality requirements but also meets the rigorous international quality standards like NEMA of the US and BS of the United Kingdom
Merino Industries Ltd
Merino is manufacturer and marketer of interior solutions and launched its operations in the year 1974 as a plywood manufacturer. With decades of expertise and experience, they have established themselves in the market by constantly delivering innovative products while meeting the highest quality standards. Boasting a pan-India presence, Merino’s head office is located in Kolkata while its marketing office is situated in Delhi. Today, they are not only amongst India’s largest manufacturer and exporter of laminates but also have a presence in the Argo-business and IT services as well.
Purbanchal Laminates Pvt Ltd
Established in the year 1998 by the Late B.L. Agarwal, Purbanchal has within no time, fortified their place in the Indian industry as one of the top manufacturers of plywood and laminates in India. Moreover, they also export their goods to six countries and are slowly but steadily increasing their global presence as well. With over 15 different textures besides Suede, Matt and Gloss Finishes, Purbanchal is the true innovator in the field of laminates
Finilex Laminates
We are a company devoted to understanding client wishes and requirements. Based on our client-centric approach, we are delivery focused and pride ourselves on our ability to adapt to the demands of every customer. We work with our clients to achieve their required cost/quality balance and deliver cost-effective solutions.Our unique attitude to partner accreditation enables us to offer solutions at a constantly high standard with a unique accountability. FINILEX accounts for a team of highly motivated professionals who share a vast range of extensive know-how and experience, delivering each order to the highest standard.
Samrat Plywood Limited
Samrat Plywood Limited is one of India’s largest producers and manufacturer of plywood with state-of-the-art manufacturing facilities located at Derabassi, Punjab. Since its inception in 1987, Samrat has grown from strength to strength and currently has a massive domestic presence spanning across 16 states and over 300 cities. Despite being in an immensely competitive market, Samrat has successfully managed to carve a niche for itself by way of constant innovations and consistent technological advances to stay on top of the gam
Sonear Industries Ltd
Sonear formerly known as Donearply is one of the largest and leading manufacturers of decorative plywood and laminates in India. With over three decades of experience and expertise in the industry, Sonear is dedicated to delivering cutting-edge products of the highest quality all across India. Based in New Delhi, India, Sonear has over 4000 employees in their roster spread over 3 spacious and technologically advanced facilities conforming to the stringent B.I.S. Standard.
Stylam Industries Limited
Incorporated in the year 1991, Stylam is an ISO 9001:2008 certified Company located at Panchkula, Chandigarh and has been manufacturing top quality HPL’s in more than 600 designs under the brand name “STYLAM”. Formerly known as Golden Laminates Limited, Stylam was incorporated by the Late Sh. N.R. Aggarwal and today boast of a production capacity around 7 million sheets of laminates per annum. With an absolute commitment to delivering top quality, Stylam is the first company in India and amongst a select few worldwide, who has been best owed with the CE certification for its compact laminates.
It consists of printed decoration paper fused to multiple sheets (6-8 pieces) of Kraft paper saturated with a synthetic thermosetting resin.
A curing or thermosetting process combines the sheets using heat and high pressure (more than 1,000 PSI) to form flexible, single, high-density laminate sheets. Occasionally, manufacturers may reinforce the layers with metal layers or mesh. The final step is to laminate the sheets onto wood substrates.
HPL is available in various colors, textures and styles. You can easily use it to imitate the appearance of other materials such as wood or metal.
The countertop surface patterns on the laminates are saturated with melanin-based resins to provide higher resistance to abrasion, thermal shock and impact, heat and discoloration.
What is high pressure laminate made of?
The raw materials include Kraft, printed decorative and overlay papers, and thermosetting synthetic resins.
Kraft paper is the core material and determines the product thickness. The decorative paper determines the design and color, while the overlay paper improves the resistance of materials regarding abrasion, scratch and heat.
The resins including phenolic or melamine act as the glue. The substrate of core material includes particleboard, MDF, and plywood.
High Pressure Laminate (HPL) Specifications
Various types or grades of HPL work for different uses and specific performance requirements. These include:
General Purpose HPL: Most commonly used and suitable for horizontal and vertical surface applications. The typical thickness ranges from 0.028″ to 0.048″ (0.71 to 1.22 mm).
Postforming HPL: The application of heat and restraint allows the type of HPL to form around curved edges. The maximum thickness is around 0.038″ (0.97 mm).
Backer HPL: These are produced without a decorative surface; thus, they tend to be slightly thinner than the decorative HLPs. They are also available as regrind—reclaimed HPL with decorative sheet sanded off.
Special purpose HPL: These improve the aesthetic appeal and enhance the physical performance. They include chemical resistant, fire-rated, and electrostatic dissipative laminates.
What is high pressure laminate used for?
HPL slabs are best-suited for countertop in general function labs with dry working conditions requiring durable, high-pressure resistance surfaces. These labs typically include product testing and technology.
Other highlights and applications:
HPL is a standard finish in areas requiring low static generation, frequent access, or ease of maintenance, including retail outlets, hospitals, and clinics.
It’s easy to clean making it ideal for places and applications where high levels of hygiene are paramount, such as laboratories, hospitals and kitchens.STAINLESS STEEL is also good for this application.
Residential and commercial applications, including walls and partitions, ceilings, furniture, benchtops, countertops, and external fitting
Electrical devices, mechanical, oil, gas and power generation
Pros and cons of HPL laminate versus solid surface
Solid surfaces are composites of different materials, including polymer resins or layers of fused acrylics. A solid surface counter is resistant to heat, water, discoloration, and abrasion. However, it can still warp, crack or discolor when exposed to temperatures above 1600C.
Compared to solid surfaces, the advantages of HPL include:
Superior wear resistance: HPL is durable. Its impact, scratch, and abrasion-resistant
Low heat conduction: It doesn’t become too hot or cold even when the surrounding temps change.
Heat resistant: While HPL cannot handle intense heat exposures. However, you can still use them for heat applications with a threshold of 275° for suspended periods.
Require minimal maintenance: It’s easy to clean and maintain, thus ideal for surfaces that need regular cleaning and maintenance.
Stylish and innovative: HPL is visually appealing and is available in modern and innovative designs with a contemporary look. They are also available in various options, patterns, textures and colors to match your space.
Versatile: HPL can be used on different types of surfaces vertically or horizontally—also on curved or cylindrical surfaces. They are affordable: Compared to other typical lab surface materials, they are the most economical option.
Disadvantages of HPL surfaces include:
They cannot handle extreme heat.
They have a low resistance to bacteria, chemicals, corrosive, fungal, water, moisture, and scratches.
What material is best suited for applications involving high heat?
The best work surface or benchtop material for your lab depends on the applications within the lab environment. It is possible to find a sweet-spot in terms of performance and cost. Additionally, most materials have pros and cons.
For example, stainless steel has a high heat tolerance and can withstand temperatures of up to 15000 F. It is also great for medical and healthcare environments. However, it is very expensive and susceptible to scratches and dents.
EPOXY RASIN offers high resistance to bacteria, chemicals, and heat, but has low scratch resistance. It’s also very expensive, has long lead times and is difficult to fabricate in the field.
When choosing the right countertop for your lab, consider the type of work you will be doing. This will help protect your investment and prolong the longevity of work surfaces.
How can CFI help?
Your needs determine the ideal surface material for your lab. CFI can assist you in assessing your current and future needs and giving you access to high-quality materials to suit all your needs. We also offer LAB DESIGN BUID CONSULTING.
LAB COUNTERTOP are a long-term investment. Thus, it is crucial to make a choice that will stand the test of time and the rigors of your work.
FAQ: Is high pressure laminate durable?
Yes. HPLs are incredibly durable and designed to withstand daily use while still looking aesthetically pleasing. HPL is a solid choice for laboratory countertops that need a durable finish but do not require special chemical resistance or extreme applications. The special-purpose grades work well for high-demand applications that may require additional chemical and wear resistance.
What is the difference between HPL and LPL?
Low Pressure Laminate (LPL) is also known as melamine or Thermally Fused Melamine, (TFM) or Thermally Fused Laminate (TFL).
Manufacturers create LPL using heat and pressure to bond 1-2 Kraft papers onto a particle board or MDF using heat-activated glue. The difference between HPL and LPL include:
HPL
LPL
Manufacturing process
A multi-step process bonds 6-8 layers of kraft paper saturated with resin, decorative paper and a transparent overlay to form a sheet of laminate paper.
It involves 1-2 melamine paper bonded directly to a substrate
HPL is purchased separately from the substrate.
Durability
It is more durable and impact-resistant, thus great for high-traffic areas.
Low impact or low wear resistance
Application
Ideal for horizontal and vertical applications, including curved and cylindrical surfaces.
Vertical applications
Price
More expensive compared to LPL
Cheaper
Maintenance
Easy to maintain and very hygienic
Easily maintained
What is considered a heat resistant surface?
Heat-resistant surfaces do not burn, melt, or heat up quickly when you place hot items on them or when temps change. They tend to minimize heat damage because they have a high heat endurance. They can withstand high temperatures without warping, cracking, or discoloration.
What is the most heat resistant countertop?
The most heat-resistant countertops include those made from natural stones (such as granite), concrete, and metals (such as stainless steel) or man made (poured & molded) epoxy resin
Are epoxy surfaces heat resistant?
Yes. Epoxy resin surfaces can withstand a great deal of heat exposure (above 3500F) without experiencing heat damage. They are ideal for most extreme lab conditions where you need additional heat resistance and the ability to use open flames on your lab countertops.
They are best suited for labs that perform heavy industrial and chemical testing and use harsh chemicals, open flames, and technology that create extreme heat. However, it is one of the most expensive countertops when comparing options.
FunderMax Vs TRESPA lab tops, which one is better?
Did you know that FunderMax and Trespa are just name brands? These are the manufacturer’s of the phenolic sheets and each project requires a custom process to CNC per the drawings and requirements for each job.
Phenolic resin countertops are made by saturating layers of natural Kraft paper with phenolic resin. They are processed under extreme heat to form a solid surface composite panel. FunderMax and TRESPA are the most common brands of phenolic resin, and each has its unique properties.
TRESPA’s non-thermal Electron Beam Curing (EBC) technology provides color stability and chemical and scratch resistance. This phenolic panel is impervious to chemical attack, and repeated cleaning never detracts from functionality or appearance. It is easily accessible with reduced lead times, and it’s easier to install.
On the other hand, FunderMax boards provide excellent countertops for applications requiring high resistance paneling and constant cleaning. They provide a higher impact, scratch, and abrasion resistance than EBC or melamine Surfaces. As always, the better one depends on your lab application and environment but both are very comparable options.
To start with what is ACP? We must know that Aluminum Composite Panels is formed when two sheets of aluminum are joined with an ore, which is non-aluminum in nature. This forms a composite aluminum panel. Here the inner section can be polyethylene. However, the external layer could be additionally layered using PVDF or Poly Vinylidene Fluoride.
What is ACP Cladding’s full form?
Many of us wonder about the ACP sheet’s full form. ACP board full form is aluminium composite panel, and it is widely utilized in various sorts of construction projects due to its versatility and various types that meet many construction needs.
What are the distinguishing characteristics of Aluminium Composite Panels?
Knowing about the ACP panel’s full form is not enough; one must understand its characteristics for the best application. In this context, discussed below are the key characteristics of aluminum composite panels.
First of all, ACP is lighter in weight. However, it is tough and enduring in nature, as well. This is the reason that ACP is mostly preferred to be used with the outer cladding. Also, such characteristics make it suitable for making signage.
ACP panel is highly preferred these days for the beautification of buildings. It is highly desired for building design when combined with glass curtain wall arrangements.
ACP panel is absolutely weather-resistive in nature. In fact, the shades of it don’t get faded under the sun’s rays as well.
The best part about the ACP panel is that one can easily find it, irrespective of the nation. Moreover, it is quite cost-effective in nature. This is considered one of the easiest materials from an installation perspective. Also, these materials require the least maintenance.
One can find ACP in varieties of shades. No matter whether you go with metallic shade or non-metallic, it can emulate the shade of wood and marble thoroughly over it. This is one of the prime reasons behind the enormous popularity of ACP. In the cladding material segment, especially, ACP is considered the most preferred material.
In terms of heat insulation characteristics, Aluminium Cadding is considered simply the best. Similarly, its characteristics of sound resisting are quite good as well.
These are extensively fire-resistive in nature. This is the reason that it is preferred for external cladding systems.
There remains a thermoplastic core, which helps in binding the layers together. In fact, the structure of such is the prime reason that makes it incredible for the outer cladding systems. Being used on the exterior of the building, it provides a glossy look and ensures greater weather protection.
Aluminium composite panel is Cost-effective & flexible in nature
When it comes to cutting or changing the shape, ACP cladding is always the preferred one. As far as being exposed to the air is concerned, ACP is highly reliable for the aluminum oxide layer it forms. This exposure safeguards the ACP panel from getting damaged by rust and issues of corrosion. Though the ACP panel is slim and lightweight in nature, one can thicken it through the process of anodization. No need is to worry about the endurance of this effect as ACP doesn’t get affected due to the effects of the sun.
People looking for easy-to-maintain material can undoubtedly trust ACP. For its characteristic of not catching dust, maintaining its cleanliness is never a big deal. Only rare cleaning can also keep it perfectly glossy.
Different types of ACP panel
After knowing what is ACP panel and its characteristics, it is important to know its types. One can find it in various options like Alucobond, Alpoli, Vitrabond, etc. It is suggested that one should understand the characteristic of each prior to opting to go with the same. Among these, Alucobond is most preferred for its commercially crucial characteristics. Firstly, it is made up of a couple of layers of aluminum cover sheer.
Its core layer is made up of polyethylene. The distinguishing part of the material is the smoothness it offers through its surface. At the same time, it is quite flexible in nature as well. One can prefer it for strenuous processes for the greater stability it ensures. One can find it in a huge variety of color options. Interestingly, it is possible to vary the color or shades as well in accordance with the requirement.
The other types possess similar characteristics as well, with little variation in their extents. However, each kind of ACP is equally weathered and resistive in nature. These are absolutely shocking preventive as well, which makes them the best option for the external layers. Their ability to endure vibration is simply unmatchable.
Vitrabond is recommended for those who want something cost-effective. Similarly, Alpolic is recommended for those who are looking for a flat ACP. In fact, Alpolic is considered one of the strongest of its kind ACP as well. Hence, one can select the specific kind of ACP as per the need.
Conclusion
Being suitable from an installation perspective, ACP has been the top pick among architects. Its lightweight characteristic makes it the most user-friendly in nature. Ultimately, it is the responsibility of the concerned buyer to ensure that the ACP is qualitatively good enough for the desired application.
Aluminum composite panels have been in significant demand for constructing transportation, building, and cars. They are flexible, allow for easy creation, are lightweight, and permit innovative and creative design. They are solid and durable and can be considered an excellent sustainable material to create signage, building, or any other item you can think of. In this article we are going to talk about top 10 ACP sheet company in India.
There is a massive demand for ACP sheets producers is growing rapidly, and there are now millions of new manufacturers of sheets that buyers demand. If you’re contemplating buying the most premium and highest quality ACP sheets, then we have developed a fantastic alternative for you.
Best ACP Sheet Company
Aluminum Composite Panel is the full form of the ACP Sheet. It is composed of three layers. The Aluminum Surface is the first layer, followed by the Polyethylene Care Core or Mineral Fire Rated core, and finally, the Aluminum Surface. These sites refer to a thin sheet at its bottom and a thick sheet in the middle. This material is made up of two types. The first is a plastic polyethylene core material, and the second is a fire-resistant material. They each have their specialties. What is the best Top 10 ACP Sheet Company In India, and how can you get the List of Aluminium Composite Panel manufacturers in India? All your problems are solved here with this article.
Suggested Read:- WPC Exterior Louvers
Top 10 ACP Sheets Manufacturer in India
Presenting top 10 ACP Sheet Manufacturer in India:
1. Reynobond
Reynobond India is an emerging manufacturer of ACP and HPL in India. ReynoArch India manufactures their High-Quality Products under two brands, ‘ReynoArch,’ our premium brand for EN Fire-Resistant ACP and HPL & Non-FR core ACP and HPL sheets second brand be ‘Facade,’ our Economic series of Non-FR core ACP. ReynoArch India embraces your innovative design and presents you with the ideal way to follow the world’s path.
Since its inception in 2020, ReynoArch has been commanding an unshaken trust in the industry by dint of its die-hard commitment towards quality, innovation, and customer delight.
2. ReynoArch
Since its inception in 2020, ReynoArch has been commanding an unshaken trust in the industry by dint of its die-hard commitment towards quality, innovation, and customer delight. ReynoArch is an end-to-end Indian Aluminium Composite Panel ACP & High-Pressure Laminates HPL manufacturer, powered by cutting-edge production facilities at Rajasthan.
The entire best-in-class ReynoArch product range is thus ‘Made in India.’ Spread over 8 acres, Adhering to the founding principle of hard work, our endeavors have allowed us to carve an unprecedented niche in the market. Today, the ReynoArch group is known for its quality products and values of integrity and reliability.
3. Virgo ACP
Virgo Group is a Delhi-based company that is believed to be the biggest multinational producer and distributor of the Aluminium rolling product in India. With over 1 million square feet of space to manufacture and an office comprised of more than 3000 workers, they can offer tonnes of their products on the market each week.
Their products are premium quality and innovative in design that impresses customers every time. Their products show finery as well as durability, strength, and flexibility. The company has over 10 years of experience manufacturing aluminum rolls and coils products. Their best ACP sheets are available under the brand name Virgo ACP. They give an old-fashioned, trendy, vintage, or any style you like and are used for creating signage, roofs, and other interior uses in addition. Take a look at Virgo ACP and take advantage of the best prices.
4. Alex Panels
Alex Aluminium Composite Panel is a Dehradun-based company with ISO 9001 & OHSAS 18001 certified. It is a subsidiary of Punjab Plywood Industries, a well-known pillar of the Indian plywood industry known for its high quality. The company is known under the name Black Cobra.
Alex makes use of “Kynar 500” resins for its exterior grade that ensures durability and anti-fungal properties. Beginning with the basic materials through to the Adhesive employed, ACP sheets are of the highest quality and have adaptability. There is a constant quality inspection in every manufacturing stage to ensure adequate thickness, density strength, and coating quality and grade of Aluminium.
5. Aludecor
Aludecor Lamination Private Limited is a Kolkata-based business and is considered one of the pioneers within the ACP sheets for business markets. The company was founded in 2004 and operated with a constant flow of confidence and trust by the customers. Aludecor, all of its products, is a “Made in India” quality, i.e., they are famous for their aesthetics and unique design.
The company has collaborated with some of the most prestigious National and International brands such as Samsung, AMUL, Toyota, KFC, Hyundai, Jaguar, HDFC, and various other big names. Before creating a quality product available to customers, they undergo multiple tests, such as color, fire, mechanical, and others. Check out their website and then purchase the next item on their list.
6. Viva
Viva is a Mumbai-based firm known as a significant and renowned brand in ACP sheets in India. The manufacturing plant is located in Gujarat, and the production capacity is seven million sq m. It was founded in 2003. and is now an ISO 9001:2015 and ISO 14001:2015 and “CE” Certified Company with an 18-story warehouse and more than 500 dealers across India.
The Viva Aluminium composite panel is of superior quality, as you may have already realized, and provides endurance at all times. ACP’s ACP texture is glossy and durable as well, and the other features of top-quality products have resulted in us being Viva, an industry leader. Top and most reputable aluminium composite panel producers in India.
7. Eurobond
Eurobond is a Bombay-based business known as an early adopter of Aluminium Composite panels. The company is under the umbrella that is Euro Panel Products Pvt. Ltd. is a market leader in providing ACPs for various industry sectors.
Eurobond is renowned for its new products that are affordable price.
8. WONDER ALU BOARD OVERSEAS
Wonder ALU Board Overseas is a New Delhi-based company that is the largest manufacturer and distributor of Aluminium Composite Panels in India. The manufacturing facility in Rajasthan covers the area of 50,000 square feet and is accompanied by many groups of experts and professors.
The aluminium composite panels are light but durable in quality and are used for various applications. They are certified quality and are cost-effective. Their key features are Elegant design, top-quality finish, and abrasion resistance.
9. Alstrong
As the name suggests, Alstrong creates unique and robust Aluminium composite panels. It is a Delhi company with its headquarters in Delhi, and the manufacturing facility is located in Jammu. The company is home to 20 company offices, 17 Warehouses, and more than 400plus PAN- India sales representatives. Its own logistics team can provide its products on time and at the agreed time.
They are known for their use of Korean and Japanese technology to create ACP sheets that are top in quality. The material and design are highly durable, non-maintenance, and safe for the environment. As for aesthetics, they are always able to provide better-looking products.
10. ALUCOBOND
Alucobond is another well-known company in India known for its premium ACP panels. The company is located in Bombay and was founded in 1969, and the manufacturing plant is located in Maharashtra. The company’s mission is modern-day construction, and with more than 50 years of expertise, they offer a simple but functional design and materials that last for a long time with you.
They produce premium panels that have a distinctive appearance and fire-resistant characteristics. They are water-proof and scratch-resistant by the firm material and lightweight in weight.
Conclusion
Top 10 ACP Sheet Company In India:- In conclusion, ACP Sheets are perfect for Your infrastructure because they give them a vintage look and are fashionable. If you choose the best quality ACP sheets, you can achieve your dreams of stunning construction, industry, or something else. These are the top 10 aluminium composite panel producers in India recognized for their sheets that are tough and long-lasting.
